- Journal Home
- Volume 36 - 2024
- Volume 35 - 2024
- Volume 34 - 2023
- Volume 33 - 2023
- Volume 32 - 2022
- Volume 31 - 2022
- Volume 30 - 2021
- Volume 29 - 2021
- Volume 28 - 2020
- Volume 27 - 2020
- Volume 26 - 2019
- Volume 25 - 2019
- Volume 24 - 2018
- Volume 23 - 2018
- Volume 22 - 2017
- Volume 21 - 2017
- Volume 20 - 2016
- Volume 19 - 2016
- Volume 18 - 2015
- Volume 17 - 2015
- Volume 16 - 2014
- Volume 15 - 2014
- Volume 14 - 2013
- Volume 13 - 2013
- Volume 12 - 2012
- Volume 11 - 2012
- Volume 10 - 2011
- Volume 9 - 2011
- Volume 8 - 2010
- Volume 7 - 2010
- Volume 6 - 2009
- Volume 5 - 2009
- Volume 4 - 2008
- Volume 3 - 2008
- Volume 2 - 2007
- Volume 1 - 2006
Commun. Comput. Phys., 16 (2014), pp. 1389-1418.
Published online: 2014-11
Cited by
- BibTex
- RIS
- TXT
In this paper, the mechanisms of material removal in chemical mechanical polishing (CMP) processes are investigated in detail by the smoothed particle hydrodynamics (SPH) method. The feature-scale behaviours of slurry flow, rough pad, wafer defects, moving solid boundaries, slurry-abrasive interactions, and abrasive collisions are modelled and simulated. Compared with previous work on CMP simulations, our simulations incorporate more realistic physical aspects of the CMP process, especially the effect of abrasive concentration in the slurry flows. The preliminary results on slurry flow in CMP provide microscopic insights on the experimental data of the relation between the removal rate and abrasive concentration and demonstrate that SPH is a suitable method for the research of CMP processes.
}, issn = {1991-7120}, doi = {https://doi.org/10.4208/cicp.261213.030614a}, url = {http://global-sci.org/intro/article_detail/cicp/7084.html} }In this paper, the mechanisms of material removal in chemical mechanical polishing (CMP) processes are investigated in detail by the smoothed particle hydrodynamics (SPH) method. The feature-scale behaviours of slurry flow, rough pad, wafer defects, moving solid boundaries, slurry-abrasive interactions, and abrasive collisions are modelled and simulated. Compared with previous work on CMP simulations, our simulations incorporate more realistic physical aspects of the CMP process, especially the effect of abrasive concentration in the slurry flows. The preliminary results on slurry flow in CMP provide microscopic insights on the experimental data of the relation between the removal rate and abrasive concentration and demonstrate that SPH is a suitable method for the research of CMP processes.