- Journal Home
- Volume 36 - 2024
- Volume 35 - 2024
- Volume 34 - 2023
- Volume 33 - 2023
- Volume 32 - 2022
- Volume 31 - 2022
- Volume 30 - 2021
- Volume 29 - 2021
- Volume 28 - 2020
- Volume 27 - 2020
- Volume 26 - 2019
- Volume 25 - 2019
- Volume 24 - 2018
- Volume 23 - 2018
- Volume 22 - 2017
- Volume 21 - 2017
- Volume 20 - 2016
- Volume 19 - 2016
- Volume 18 - 2015
- Volume 17 - 2015
- Volume 16 - 2014
- Volume 15 - 2014
- Volume 14 - 2013
- Volume 13 - 2013
- Volume 12 - 2012
- Volume 11 - 2012
- Volume 10 - 2011
- Volume 9 - 2011
- Volume 8 - 2010
- Volume 7 - 2010
- Volume 6 - 2009
- Volume 5 - 2009
- Volume 4 - 2008
- Volume 3 - 2008
- Volume 2 - 2007
- Volume 1 - 2006
Commun. Comput. Phys., 7 (2010), pp. 904-926.
Published online: 2010-07
Cited by
- BibTex
- RIS
- TXT
The energetic optimization problem, e.g., searching for the optimal switching protocol of certain system parameters to minimize the input work, has been extensively studied by stochastic thermodynamics. In this work, we study this problem numerically using iterative dynamic programming. The model systems under investigation are toy actuators consisting of spring-linked beads with loading force imposed on both ending beads. For the simplest case, i.e., a one-spring actuator driven by tuning the stiffness of the spring, we compare the optimal control protocol of the stiffness for both the overdamped and the underdamped situations, and discuss how inertial effects alter the irreversibility of the driven process and thus modify the optimal protocol. Then, we study the systems with multiple degrees of freedom by constructing oligomer actuators, in which the harmonic interaction between the two ending beads is tuned externally. With the same rated output work, actuators of different constructions demand different minimal input work, reflecting the influence of the internal degrees of freedom on the performance of the actuators.
}, issn = {1991-7120}, doi = {https://doi.org/10.4208/cicp.2009.09.123}, url = {http://global-sci.org/intro/article_detail/cicp/7659.html} }The energetic optimization problem, e.g., searching for the optimal switching protocol of certain system parameters to minimize the input work, has been extensively studied by stochastic thermodynamics. In this work, we study this problem numerically using iterative dynamic programming. The model systems under investigation are toy actuators consisting of spring-linked beads with loading force imposed on both ending beads. For the simplest case, i.e., a one-spring actuator driven by tuning the stiffness of the spring, we compare the optimal control protocol of the stiffness for both the overdamped and the underdamped situations, and discuss how inertial effects alter the irreversibility of the driven process and thus modify the optimal protocol. Then, we study the systems with multiple degrees of freedom by constructing oligomer actuators, in which the harmonic interaction between the two ending beads is tuned externally. With the same rated output work, actuators of different constructions demand different minimal input work, reflecting the influence of the internal degrees of freedom on the performance of the actuators.