arrow
Volume 10, Issue 4
Convergence Detection in Direct Simulation Monte Carlo Calculations for Steady State Flows

Jonathan M. Burt & Iain D. Boyd

Commun. Comput. Phys., 10 (2011), pp. 807-822.

Published online: 2011-10

Export citation
  • Abstract

A new criterion is presented to detect global convergence to steady state, and to identify local transient characteristics, during rarefied gas flow simulations performed using the direct simulation Monte Carlo (DSMC) method. Unlike deterministic computational fluid dynamics (CFD) schemes, DSMC is generally subject to large statistical scatter in instantaneous flow property evaluations, which prevents the use of residual tracking procedures as are often employed in CFD simulations. However, reliable prediction of the time to reach steady state is necessary for initialization of DSMC sampling operations. Techniques currently used in DSMC to identify steady state convergence are usually insensitive to weak transient behavior in small regions of relatively low density or recirculating flow. The proposed convergence criterion is developed with the goal of properly identifying such weak transient behavior, while adding negligible computational expense and allowing simple implementation in any existing DSMC code. Benefits of the proposed technique over existing convergence detection methods are demonstrated for representative nozzle/plume expansion flow, hypersonic blunt body flow and driven cavity flow problems.

  • Keywords

  • AMS Subject Headings

  • Copyright

COPYRIGHT: © Global Science Press

  • Email address
  • BibTex
  • RIS
  • TXT
@Article{CiCP-10-807, author = {Jonathan M. Burt and Iain D. Boyd}, title = {Convergence Detection in Direct Simulation Monte Carlo Calculations for Steady State Flows}, journal = {Communications in Computational Physics}, year = {2011}, volume = {10}, number = {4}, pages = {807--822}, abstract = {

A new criterion is presented to detect global convergence to steady state, and to identify local transient characteristics, during rarefied gas flow simulations performed using the direct simulation Monte Carlo (DSMC) method. Unlike deterministic computational fluid dynamics (CFD) schemes, DSMC is generally subject to large statistical scatter in instantaneous flow property evaluations, which prevents the use of residual tracking procedures as are often employed in CFD simulations. However, reliable prediction of the time to reach steady state is necessary for initialization of DSMC sampling operations. Techniques currently used in DSMC to identify steady state convergence are usually insensitive to weak transient behavior in small regions of relatively low density or recirculating flow. The proposed convergence criterion is developed with the goal of properly identifying such weak transient behavior, while adding negligible computational expense and allowing simple implementation in any existing DSMC code. Benefits of the proposed technique over existing convergence detection methods are demonstrated for representative nozzle/plume expansion flow, hypersonic blunt body flow and driven cavity flow problems.

}, issn = {1991-7120}, doi = {https://doi.org/10.4208/cicp.090210.311210a}, url = {http://global-sci.org/intro/article_detail/cicp/7462.html} }
TY - JOUR T1 - Convergence Detection in Direct Simulation Monte Carlo Calculations for Steady State Flows AU - Jonathan M. Burt & Iain D. Boyd JO - Communications in Computational Physics VL - 4 SP - 807 EP - 822 PY - 2011 DA - 2011/10 SN - 10 DO - http://doi.org/10.4208/cicp.090210.311210a UR - https://global-sci.org/intro/article_detail/cicp/7462.html KW - AB -

A new criterion is presented to detect global convergence to steady state, and to identify local transient characteristics, during rarefied gas flow simulations performed using the direct simulation Monte Carlo (DSMC) method. Unlike deterministic computational fluid dynamics (CFD) schemes, DSMC is generally subject to large statistical scatter in instantaneous flow property evaluations, which prevents the use of residual tracking procedures as are often employed in CFD simulations. However, reliable prediction of the time to reach steady state is necessary for initialization of DSMC sampling operations. Techniques currently used in DSMC to identify steady state convergence are usually insensitive to weak transient behavior in small regions of relatively low density or recirculating flow. The proposed convergence criterion is developed with the goal of properly identifying such weak transient behavior, while adding negligible computational expense and allowing simple implementation in any existing DSMC code. Benefits of the proposed technique over existing convergence detection methods are demonstrated for representative nozzle/plume expansion flow, hypersonic blunt body flow and driven cavity flow problems.

Jonathan M. Burt and Iain D. Boyd. (2011). Convergence Detection in Direct Simulation Monte Carlo Calculations for Steady State Flows. Communications in Computational Physics. 10 (4). 807-822. doi:10.4208/cicp.090210.311210a
Copy to clipboard
The citation has been copied to your clipboard