Analysis of Molding Process Parameters of Bra Cup
DOI:
10.3993/jfbi03200904
Journal of Fiber Bioengineering & Informatics1 (4) (2009), pp. 275-280
Published online: 2008-12
Cited by
Export citation
- BibTex
- RIS
- TXT
@Article{JFBI-1-275,
author = {Lijing Wang},
title = {Analysis of Molding Process Parameters of Bra Cup},
journal = {Journal of Fiber Bioengineering and Informatics},
year = {2008},
volume = {1},
number = {4},
pages = {275--280},
abstract = {Polyurethane foam is the material most widely used in bra cup production. From the main
factors affecting the molding process of molded cup, this article analyzed the properties of polyurethane
foam, and elaborated the principle of molding from the molecular structure of polyurethane foam. Then,
a set of molding experiments has been done for three different parameters of materials. The results of
the experiment analyzed the molding process parameters of the polyurethane foam, and summarized
the main factors affecting the same. The work aims to develop a quantitative control method for bra
cup modelling process.},
issn = {2617-8699},
doi = {https://doi.org/10.3993/jfbi03200904},
url = {http://global-sci.org/intro/article_detail/jfbi/5050.html}
}
TY - JOUR
T1 - Analysis of Molding Process Parameters of Bra Cup
AU - Lijing Wang
JO - Journal of Fiber Bioengineering and Informatics
VL - 4
SP - 275
EP - 280
PY - 2008
DA - 2008/12
SN - 1
DO - http://doi.org/10.3993/jfbi03200904
UR - https://global-sci.org/intro/article_detail/jfbi/5050.html
KW - polyurethane foam
KW - molding principle
KW - molding processing parameters
AB - Polyurethane foam is the material most widely used in bra cup production. From the main
factors affecting the molding process of molded cup, this article analyzed the properties of polyurethane
foam, and elaborated the principle of molding from the molecular structure of polyurethane foam. Then,
a set of molding experiments has been done for three different parameters of materials. The results of
the experiment analyzed the molding process parameters of the polyurethane foam, and summarized
the main factors affecting the same. The work aims to develop a quantitative control method for bra
cup modelling process.
Lijing Wang. (2008). Analysis of Molding Process Parameters of Bra Cup.
Journal of Fiber Bioengineering and Informatics. 1 (4).
275-280.
doi:10.3993/jfbi03200904
Copy to clipboard