Electrical Actuation of Textile Polymer Materials
DOI:
10.3993/jfbi06200801
Journal of Fiber Bioengineering & Informatics,1 (2008), pp. 1-6
Published online: 2008-01
Cited by
Export citation
- BibTex
- RIS
- TXT
@Article{JFBI-1-1,
author = {Lijing Wang},
title = {Electrical Actuation of Textile Polymer Materials},
journal = {Journal of Fiber Bioengineering and Informatics},
year = {2008},
volume = {1},
number = {1},
pages = {1--6},
abstract = {Polymers used in textiles were found to be effective as actuator materials with large
deformation. Particularly, the polymers with low dielectric constants used to be considered inactive
to electric field were turned out to be efficient actuator materials. They were classified into three
types; (1) polymer gels swollen with solvents, (2) plasticized polymers, (3) bulk polymers. From the
viewpoint of easy-to-operate, polymer gel deformation with swelling and deswelling was excluded
here. Swollen dielectric gels could be electrically deformed by solvent drag that induced asymmetric
pressure distribution in the gels. Bending and crawling motions were observed in these materials. In the
case of plasticized polymers, especially in the case of poly(vinyl chloride) with plasticizers, amoebalike
reversible creep deformation was found, and the strain with over several hundreds of percent was
detected. The material was stable and could have been operated for over two years. Bulk polymer
film like poly(ethylene terephthalate) was found to oscillate under an application of dc electric field.
Of course, the Maxwell force induced elastic contractile deformation can be expected in all cases.
The variation of the electrically induced deformation in dielectric polymer materials were demonstrated
to be vast and expected application fields are also spread widely, particularly as artificial muscles.},
issn = {2617-8699},
doi = {https://doi.org/10.3993/jfbi06200801},
url = {http://global-sci.org/intro/article_detail/jfbi/5017.html}
}
TY - JOUR
T1 - Electrical Actuation of Textile Polymer Materials
AU - Lijing Wang
JO - Journal of Fiber Bioengineering and Informatics
VL - 1
SP - 1
EP - 6
PY - 2008
DA - 2008/01
SN - 1
DO - http://doi.org/10.3993/jfbi06200801
UR - https://global-sci.org/intro/article_detail/jfbi/5017.html
KW - actuator
KW - dielectric polymer
KW - artificial muscle
KW - polyethylene terephthalate
KW - polyvinyl chloride
KW - gels
KW - plasticizer
AB - Polymers used in textiles were found to be effective as actuator materials with large
deformation. Particularly, the polymers with low dielectric constants used to be considered inactive
to electric field were turned out to be efficient actuator materials. They were classified into three
types; (1) polymer gels swollen with solvents, (2) plasticized polymers, (3) bulk polymers. From the
viewpoint of easy-to-operate, polymer gel deformation with swelling and deswelling was excluded
here. Swollen dielectric gels could be electrically deformed by solvent drag that induced asymmetric
pressure distribution in the gels. Bending and crawling motions were observed in these materials. In the
case of plasticized polymers, especially in the case of poly(vinyl chloride) with plasticizers, amoebalike
reversible creep deformation was found, and the strain with over several hundreds of percent was
detected. The material was stable and could have been operated for over two years. Bulk polymer
film like poly(ethylene terephthalate) was found to oscillate under an application of dc electric field.
Of course, the Maxwell force induced elastic contractile deformation can be expected in all cases.
The variation of the electrically induced deformation in dielectric polymer materials were demonstrated
to be vast and expected application fields are also spread widely, particularly as artificial muscles.
Lijing Wang. (2008). Electrical Actuation of Textile Polymer Materials.
Journal of Fiber Bioengineering and Informatics. 1 (1).
1-6.
doi:10.3993/jfbi06200801
Copy to clipboard