TY - JOUR
T1 - Comparison of Human Body Sizing Measurement Data by Using Manual and 3D Scanning Measuring Techniques
AU - Jing Qi, Xin Zhang, Boan Ying & Feifei Lv
JO - Journal of Fiber Bioengineering and Informatics
VL - 1
SP - 83
EP - 95
PY - 2011
DA - 2011/04
SN - 4
DO - http://doi.org/10.3993/jfbi04201109
UR - https://global-sci.org/intro/article_detail/jfbi/4905.html
KW - Correlation and Regression Analysis
KW - Manual Measurement
KW - 3D Automatic Measurement
KW - 3D Interactive Measurement
AB - In this paper, we analyzed the data of the 17 body sizing measurement parameters of 300 adult male
participants who were Shaanxi adult male aged 20 ∼ 50, which were collected by using the 3D automatic
measurement, 3D interactive measurement and manual measurement. We compared the data of the 3D
automatic measurement with those of the 3D interactive measurement and the manual measurement.
From the results of the analysis, we can draw the following conclusions: (1) Deviation between the manual
measurement and the 3D scanning measurement existed obviously, which cannot be ignored; (2) In the
3D automatic measurement, as the result of the deviation of the identification to the bone location, the
measurement data must be checked and modified interactively; (3) The posture of the participant has a
significant efect on the measurement data, and the specified basic stance will affect the measurements of
shoulder, breast and waist. Therefore, the scanning posture should be standardized based on the need of
the study. For example the stance with feet together can make the height measurement more accurate;
(4) Many factors would interfere with the accuracy of the manual measure and result the difference with
3D measurement, such as the breathing and posture of the participants, and the measurement skill,
experience, position mark etc. (5) There is a linear relation between the manual measurement and the
3D scanning measurement. By establishing the linear regression model the measurement data can be
forecasted and calculated.