TY - JOUR
T1 - The Influence of Heat Setting Conditions on Mechanical Properties of PTT Filaments
AU - Ying Chen, Xin Ding,  Yuling Li & Xueqian Zhao
JO - Journal of Fiber Bioengineering and Informatics
VL - 1
SP - 51
EP - 58
PY - 2011
DA - 2011/04
SN - 4
DO - http://doi.org/10.3993/jfbi04201106
UR - https://global-sci.org/intro/article_detail/jfbi/4902.html
KW - Poly(Trimethylene Terephthalate)
KW - Heat Setting
KW - Young's Modulus
KW - Elastic Recovery
KW - Temperature
KW - Time Period
AB - It is proposed that Poly(Trimethylene Terephthalate) (PTT) filaments are used for fabricating vascular
prostheses instead of Poly(Ethylene Terephthalate) (PET) because of their lower Young's modulus and
superior elastic recovery. The heat setting process is necessary to keep the stability of shape and
mechanical properties as well as making the flattened tubular structures round. However, the best
heat setting condition for keeping properties of lower Young's modulus and superior elastic recovery of
PTT filaments is unknown. This paper studies the influence of different heat setting conditions to the
change of Young's modulus and elastic recovery. The temperature range is chosen from 120 to 180 °C and time period is chosen from 30 s to 90 s. The heat setting of yarns is both done in the relaxation
state and tension state. Results show that the best heat setting conditions to get lower modulus, higher
elastic recovery and better creep property at the temperature of 160 °C under the tension state through
60 s. The tension or relaxation state has the biggest influence on elastic recovery and Young's modulus
while time period has the least influence.