TY - JOUR
T1 - Hydrophobicity and Phase Changes of Pd/SiO<sub>2</sub> Organic-inorganic Hybrid Materials Calcined in Air Atmosphere
AU - Jing Yang,  Baosong Li, Hao Xu, Yue Li & Xiang Huo
JO - Journal of Fiber Bioengineering and Informatics
VL - 1
SP - 117
EP - 127
PY - 2014
DA - 2014/07
SN - 7
DO - http://doi.org/10.3993/jfbi03201410
UR - https://global-sci.org/intro/article_detail/jfbi/4771.html
KW - Sol-gel Method
KW - Palladium Doping
KW - Hydrophobicity
KW - Phase Change
AB - Pd/SiO_2 organic-inorganic hybrid material was prepared by sol-gel method, in which PdCl_2 was added
into methyl-modified silica sol. The Pd/SiO_2 sol particle size distribution, the hydrophobicity and phase
changes of Pd/SiO_2 hybrid materials calcined at 200, 350, 500, 600 and 750 °C in air atmosphere
were discussed. The Pd/SiO_2 sol system exhibits moderate dispersion and the mean particle size of
Pd/SiO_2 sol is 2.70 nm. When the calcination temperature is raised to 350 °C, metallic palladium of
high crystallinity is formed in the Pd/SiO_2 sample. PdO occurs in minor quantities in the Pd/SiO_2
sample calcined at 500 °C, which increases in amount in the samples calcined at 600 and 750 °C. With
the increase of calcination temperature, the Si-CH_3 and Si-OH bands in Pd/SiO_2 materials are found to
decrease in absorption intensity and the hydrophobicity on Pd/SiO_2 film surfaces increases. The water
contact angle on the Pd/SiO_2 film surface achieves the maximum value as the calcination temperature
is up to 350 °C and the particle sizes of the formed metallic Pd are about 15 ∼ 20 nm. The optimal
calcination temperature for hydrophobic Pd/SiO_2 membrane materials is about 350 °C.